Owners Manual

About this task

The following image indicates the location of the heat sink and provides a visual representation of the installation procedure.

Steps

1. Align the screws of the heat sink with the holders on the system board and place the heat sink on the processor.

2. Tighten the captive screws that secure the heat sink to the system board.

NOTE: Tighten the screws in a sequential order (1,2,3) as printed on the heat sink.

Next steps

1. Install the fan assembly.

2. Install the front bezel.

3. Install the side cover.

4. Follow the procedure in after working inside your computer.

Isärtagning och ihopsättning