Owners Manual

6 Install the:

a heat sink assembly

b optical drive

c cooling shroud

d 2.5 hard drive assembly

e front bezel

f cover

7 Follow the procedure in After working inside your computer.

Intrusion switch

Removing intrusion switch

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a cover

b front bezel

c cooling shroud

3 To the intrusion switch:

a Disconnect the intrusion switch cable from the connector on the system board [1].

b Slide the intrusion switch and push it to remove from the chassis [2].

Disassembly and reassembly