Owners Manual

NOTE: After releasing the Optical drive, you can also ip the drive assembly for easy access to the drive

cables.

NOTE: The Optical drive cables are available on side of the drive assembly.

5 To remove the optical drive:

a Slide the tab to release the optical drive [1].

b Push the optical drive away from the assembly [2][3].

Installing optical drive

1 Slide the optical drive into the optical drive assembly.

2 Align the tabs on the optical assembly with the slots on the computer.

3 Lower the optical drive assembly into the computer.

4 Lock the latch to secure the optical drive to the computer.

5 Connect the data and the power cables to the optical drive.

6 Install the:

a 2.5 inch hard drive assembly

Disassembly and reassembly