Owners Manual

Installing system fan
1 Insert the grommets into the slots on the back of the computer.
2 Hold the system fan with the cable facing the bottom of the computer.
3 Align the grooves of the system fan with the grommets on the chassis wall.
4 Pass the grommets through the corresponding grooves on the system fan.
5 Stretch the grommets and slide the system fan toward the computer until it locks into place.
NOTE
: Install the lower two grommets rst.
6 Connect the system fan cable to the connector on the system board.
7 Secure the intrusion switch cable to the system fan with an adhesive tape.
8 Route the intrusion cable through the system fan grommet.
9 Connect the intrusion switch cable to the connector on the system board.
10 Close the front panel door.
11 Install the:
a bezel
b cover
12 Follow the procedure in After working inside your computer.
50
Disassembly and reassembly