Reference Guide

Table 8. Processor Status Events (continued)
Event Message Severity Cause
a single processor system and
PROC # for multiprocessor
system.
<Processor Entity> status
processor sensor Thermal
Trip.
Critical The processor generates this event
before it shuts down because of
excessive heat caused by lack of cooling
or heat synchronization.
<Processor Entity> status
processor sensor recovered
from IERR.
Information This event is generated when a
processor recovers from the internal
error.
<Processor Entity> status
processor sensor disabled.
Warning This event is generated for all
processors that are disabled.
<Processor Entity> status
processor sensor terminator
not present.
Information This event is generated if the terminator
is missing on an empty processor slot.
<Processor Entity> presence
was deasserted.
Critical This event is generated when the system
could not detect the processor.
<Processor Entity> presence
was asserted.
Information This event is generated when the earlier
processor detection error was corrected.
<Processor Entity> thermal
tripped was deasserted.
Information This event is generated when the
processor has recovered from an earlier
thermal condition.
<Processor Entity>
configuration error was
asserted.
Critical This event is generated when the
processor configuration is incorrect.
<Processor Entity>
configuration error was
deasserted.
Information This event is generated when the earlier
processor configuration error was
corrected.
<Processor Entity> throttled
was asserted.
Warning This event is generated when the
processor slows down to prevent
overheating.
<Processor Entity> throttled
was deasserted.
Information This event is generated when the earlier
processor throttled event was corrected.
CPU <number> has an internal
error (IERR).
Critical The specified CPU generated an internal
error.
CPU <number> has a thermal
trip (over-temperature)
event.
Critical The CPU generates this event before it
shuts down because of excessive heat
caused by lack of cooling or heat
synchronization.
CPU <number> configuration is
unsupported.
Warning The specified CPU is not support for this
system.
CPU <number> is present.
Information The specified CPU is present.
CPU <number> terminator is
present.
Information This event is generated if the terminator
is present on a processor slot.
CPU <number> terminator is
absent.
Warning This event is generated if the terminator
is missing on an empty processor slot.
CPU <number> is throttled.
Warning This event is generated when the
processor slows down to prevent
overheating.
188 System Event Log Messages for IPMI Systems