Reference Guide

Arguments arg1 = location, arg2 = type, arg3 = state
Detailed
Description
The SD card device has returned to a normal state. The SD card type and the
current status of the SD card is also displayed.
Recommended
Response
Action
No response action is required.
Category System Health (HWC = Hardware Config)
Severity Severity 3 (Informational)
OMSA Event ID 5752
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
HWC8006
Message The SD card device state has changed to a warning state. SD card location: arg1 ,
SD card device type: arg2 , SD card state: arg3 .
Arguments arg1 = location, arg2 = type, arg3 = state
Detailed
Description
The SD card device is not functioning correctly, and its state has changed to a
warning state.
Recommended
Response
Action
Reinsert the SD card or try a different SD card and retry the operation. If the issue
persists, do one of the following to resolve the error: 1) If the SD card sensor is
installed on the internal SD module, replace the module. 2) If the SD card sensor is
embedded on the system board, replace the system board. . For more information,
contact your service provider.
Category System Health (HWC = Hardware Config)
Severity Severity 2 (Warning)
OMSA Event ID 5753
OMSA Trap ID 5753
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔* ✔ ✔
CMC
636