Reference Guide

Detailed
Description
The AutoConfig configuration import operation could not be started, because the
AutoConfig .xml file is not available in the sharename or location specified in the
DHCP scope option field where the VendorID=iDRAC.
Recommended
Response
Action
Update the sharename or location in the DHCP scope option field where the
VendorID=iDRAC, make sure the AutoConfig import file is available, and then retry
the operation.
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Trap/EventID 10635
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
DIS103
Message The AutoConfig operation is unable to access a network share folder, because
incorrect credentials are specified in the DHCP scope option field where the
VendorID=iDRAC.
Detailed
Description
The network share folder cannot be accessed by using the credentials specified in
the DHCP scope option field where the VendorID=iDRAC.
Recommended
Response
Action
Verify whether or not the following are correctly entered in the DHCP scope
option field where the VendorID=iDRAC, and then retry the operation: 1) Network
share name. 2) The IP address of the network share folder. 3) The username and
password (-u <username> & -p <password>)
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Trap/EventID 10635
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔
CMC
472