Reference Guide

PR28
Message Unable to locate device in current configuration.
Detailed
Description
The device that the job was intended for is no longer detected. This could be due
to the device being removed, disabled, or a failure.
Recommended
Response
Action
If the device was removed, reinsert the device and retry the operation. If the device
was disabled, re-enable the device and retry the operation.
Category Configuration (PR = Part Exchange)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
PR29
Message Unable to locate device in previous configuration.
Detailed
Description
The device that the job was intended for has no previous information recorded.
The request has failed as this information is required to initiate the operation. This
has been deprecated.
Recommended
Response
Action
Enable the Collect System Inventory on Restart attribute of the Lifecycle Controller
and restart the system. Alternatively, use the Unified Server Configurator utility.
Category Configuration (PR = Part Exchange)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1015