Command Line Interface Guide

omreport storage Commands 205
omreport Enclosure Slot Occupancy Report
Table 7-10 describes the syntax for the omreport Enclosure Slot Occupancy
Report Commands.
omreport Battery Status
Table 7-11 describes the syntax for the omreport Battery Commands.
Table 7-10. omreport Enclosure Slot Occupancy Report Commands
Required Command
Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
omreport storage
enclosure
Displays property
information for all enclosures
attached to the system.
controller=id enclosure=
<ENCLOSUREID>
info=pdslotreport
where id is the controller number
and ENCLOSUREID is the
enclosure number.
For example: controller=0
enclosure=2
Displays the empty and
occupied slot details for the
specified enclosure.
NOTE: This command is not
supported on Blackplane,
SCSI, and SWRAID
controllers.
Table 7-11. omreport Battery Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs Use
omreport storage
battery
Displays all batteries present
on all controllers on the
system (Some controllers do
not have batteries.)
controller=id
where id is the controller number.
For example: controller=0
Displays the battery on the
specified controller.
controller=id battery=id
where id is the controller number.
For example: controller=0
Displays the specified
battery.