Owner's Manual

106 omconfig: Managing Components
• Ambient temperature of the system
• Remote access IPv4 address
• Remote access IPv6 address
• Specify and configure the LCD line number
• View the encryption state report of the LCD
• Configure LCD to indicate an active remote session when the
K ernel-
based
V irtual M achine (KVM) is available
NOTE: You can configure the Power and NMI buttons only if they are present on
your system.
Table 4-5 shows the valid parameters for the command.
Table 4-5. omconfig chassis frontpanel/omconfig mainsystem frontpanel
name=value pair 1 name=value pair 2 Description
lcdindex=
<index>
NA Specifies the LCD line number.
config=none |
default | custom
NA none: Sets the LCD text to none.
default: Sets the LCD text to default.
custom: Sets the LCD text to custom.
text=<custom
text>
NA Sets the custom text for LCD when config=
custom.
nmibutton=
enable | disable
NA enable: Enables the NMI button on the
system.
disable: Disables the NMI button on the
system.
powerbutton=
enable | disable
NA true: Enables the Power button on the
system.
false: Disables the Power button on the
system.
config=sysname NA Sets the name of the system.
config=syspower NA Sets the system power information.
config=servicetag NA Sets the system service tag information.
config=
remoteaccessipv4
NA Sets the remote access IPv4 information.
config=
remoteaccessipv6
NA Sets the remote access IPv6 information.