Users Guide


Temperature Probe Properties and Tasks

Does my enclosure support this feature? See "Supported Features."

Use this window to view information about the enclosure's temperature probes.

Temperature Probe Properties and Tasks


Set Temperature Probe Properties and Tasks

Click the Set Temperature Probe button to launch the wizard for changing the temperature probe's Warning threshold. You can change the Warning threshold
for each of the temperature probes included in the enclosure. See "Set Temperature Probe Values" for more information.

Do the following to launch the Set Temperature Probe wizard:
1. Expand the Storage tree object to display the controller objects.
2. Expand a controller object.
3. Expand a Connector object.
4. Expand the enclosure object.
Part
Number
This property displays the part number of the power supply.
ThispropertyisnotdisplayedforthePowerVault™22xSenclosuresthathaveE.17firmwareorlater.
Property
Definition
Status




These icons represent the severity or health of the storage component. See "Storage Component Severity" for more information.
NOTE: On some enclosures, Storage Management may experience a short delay before displaying the current enclosure temperature and
temperature probe status. For more information, see "Storage Management May Delay Before Updating Temperature Probe Status."
Name
This property displays the name of the temperature probe.
State
This property displays the current status of the temperature probe.
Ready — The temperature probe is functioning normally.
Degraded — The temperature probe has encountered a failure and is operating in a degraded state.
Failed — The temperature probe has encountered a failure and is no longer functioning. Storage Management may also be unable to
communicate with the enclosure using SES commands. The Failed state is displayed when the enclosure does not respond to a status query
from Storage Management for any reason. For example, disconnecting the cable would cause this state to be displayed.
Minimum Warning Threshold Exceeded — The enclosure's temperature has dropped below the minimum warning threshold. See "Set
Temperature Probe Values" for more information.
Maximum Warning Threshold Exceeded — The enclosure's temperature has risen above the maximum warning threshold. See "Set
Temperature Probe Values" for more information.
Missing — The temperature probe is not present in the enclosure.
Inactive — The temperature probe is present in the enclosure, but the EMM that it monitors is not installed.
Reading
This property displays the current temperature of the enclosure as reported by the temperature probe.
Warning
Threshold
The Minimum and Maximum properties indicate the temperatures currently set for the Warning threshold. See "Set Temperature Probe
Values" for more information.
Failure
Threshold
The Minimum and Maximum properties indicate the temperatures currently set for the Failure threshold. See "Set Temperature Probe Values"
for more information.