Users Guide

– Post only Virtualization-Related Critical and Warning Events - Post only virtualization-related critical and

warning events; this is the default event posting level.

2. To enable all hardware alarms and events, select the Enable Alarms for Dell Hosts check box.

NOTE: Dell hosts that have alarms enabled respond to critical events by entering maintenance mode.

3. A dialog box Enabling Dell Alarm Warning is displayed, click Continue to accept the change, or click Cancel. You

should click on

Continue for the clusters displayed when the DRS is not enabled.

NOTE: This step is only seen if Enable Alarms For Dell Hosts is selected.

4. To continue the wizard, click Apply.