Users Guide

In syscap.sh on systems running Linux:

DT_SYS_REPFILE=$dt_systems/$dt_platform/syscfg.ini

NOTE: If the replication requires a change in the memory redundancy mode, reboot the target server and execute

the script again to complete the replication.

Specifying The RAC Configuration Variables

The IP address for your target system RAC is set in the sample script as 10.98.8.121 by default. Edit this value to reflect

the actual IP address of your target system RAC, if applicable. Additionally, the RAC configuration file used to configure

your RAC is set by default to raccfg.ini. If you use the RACCAP.BAT or raccap.sh sample script to generate the raccfg.ini

file, there is no need to edit this default setting. If you have made any modifications to the sample scripts or to the

suggested directory structure, you must confirm that raccfg.ini is correctly named and that the path is correctly set for

your deployment.

To edit the RAC configuration variables, locate the following lines:

In RACCAP.BAT:

set DT_RAC_CAPFILE=%DT_SYSTEMS%\%DT_PLATFORM%\raccfg.ini

In raccap.sh:

DT_RAC_CAPFILE=$dt_systems/$dt_platform/raccfg.ini

To edit the RAC configuration variables, locate the following lines:

In RACREP.BAT:

:: RAC section

set DT_NICCFG=10.98.8.121

set DT_RAC_CAPFILE=%DT_SYSTEMS%\%DT_PLATFORM%\raccfg.ini

In racrep.sh:

# RAC section

DT_NICCFG=10.98.8.121

set DT_RAC_CAPFILE=$dt_systems/$dt_platform/raccfg.ini

Specifying Variables Used To Create Disk Partitions And Install The Dell Utility Partition

NOTE: If the primary deployment state (DT_PARTN) is set to OFF, the partitioning deployment state subsection is

skipped.

The PARTCFG.BAT (Windows) or partcfg.sh (Linux) sample script provides the following disk partitioning default values.

These values must be confirmed in some cases, and modified in other cases, before performing a deployment. Locate

the partn label to find the following lines:

In PARTCFG.BAT:

set DT_PARTN_UP=ON

set DT_MOUNT=H

:: Default Hard Drive

set DT_HD=0

:: PARTCFG section

set DT_OS_SIZE=4000

set DT_OS_FSTYPE=FAT32

if not "%DT_PARTN_UP%"=="ON" goto ospart

:: DELLUP section

set DT_UP_SIZE=32

set DT_UP_IMAGE=%DT_SYSTEMS%\UPIMG.BIN