User's Manual

46 Preparing the Directory Structure for Deployment in Microsoft Windows PE
Creating Operating System Installation Directories for Windows Server 2003
Operating Systems
For deployment of Windows Server 2003 operating systems, perform the
following steps:
1
On a management station create a folder, for example os_deploy .
2 Make this folder shareable.
3 Create two folders Dell and W2K3SRC under this shareable directory
os_deploy .
4 Copy the Dell folder from WinPE DTK CD to Dell folder created under
os_deploy folder on the management station.
5 Copy i386 folder from the Windows Server 2003 operating system CD to
the
W2K3SRC folder created under the os_deploy folder on the
management station.
6 Inside the os_deploy\Dell\toolkit\systems folder, create a target system
folder for example “
pe4600 ”. Inside this folder create a folder
“
$OEM$.NET ” for the Windows Server 2003 operating system
installation.
The target system name should be the DTK standard name. To know the
system name, run
TKENVSET.BAT located in the
x:\Dell\Toolkit\template\scripts directory, and then run the SET
command. In the Details section, see the dt_platform name.
7 Create one more directory textmode under $OEM$.NET . Copy the
extracted controller drivers downloaded from
support.dell.com to the
textmode folder.
8 Copy unattend.txt from os_deploy\dell\toolkit\template\configs folder to
os_deploy\dell\toolkit\systems\pe4600 .
9 Edit unattend.txt and modify the following mandatory fields: