Quick Reference Guide

RAIDCFG 159
Importing and Clearing Foreign Configurations
Table 4-8 lists the RAIDCFG options, parameters, and pre-defined arguments
for foreign configurations.
Table 4-8. RAIDCFG Options for Foreign Configurations
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description
-ctrl -c=id -ac=
fgnimp
or
controller
controllerid=id
action=
foreignimport
NA <valid virtual
disk ID
number>
Imports the foreign configuration
detected in the selected controller.
This feature is supported on PERC
5 and later controllers and is not
supported on SAS controllers.
If you use this argument on a
controller that does not have a
foreign configuration, the "No
Foreign configuration present in
the controller" message is
displayed.
Example:
A:>raidcfg -ctrl -c=2 -
ac=fgnimp
-ctrl -c=id -ac=
fgnclr
or
controller
controllerid=id
action=
foreignclear
NA <valid virtual
disk ID
number>
Clears the foreign configuration
detected in the selected controller.
This feature is supported on PERC
5 and later controllers and is not
supported on SAS controllers.
If you use this argument on a
controller that does not have a
foreign configuration, the "No
Foreign configuration present in
the controller" message is
displayed.
Example:
A:>raidcfg -ctrl -c=2 -
ac=fgnclr