User's Manual

Preparing the Script Files for Deployment Using Embedded Linux 107
Table 8-1. Scripts For Deployment
Capture Scripts Replication Scripts Deployment Scripts Others
raccap.sh —
Captures RAC
settings to a file for
Dell™ Remote
Access Controller
(DRAC) 4 RACs.
• tkenvset.sh —
Used by
raccap.sh to
inform the task
scripts where to
find the DTK
utilities, scripts,
and
configuration
files.
•
racadm — Used
by
raccap.sh to
retrieve RAC
information and
to configure
settings. The
wrapper script,
racadm , calls
racadm3 or
racadm4
depending on the
system
configuration.
•
syscfg — Used by
raccap.sh to
configure DRAC
5.
racrep.sh — Applies
the RAC
configuration
settings saved in a
file to the current
system.
• tkenvset.sh —
Used by
racrep.sh
to inform the task
scripts where to
find the DTK
utilities, scripts,
and configuration
files.
•
racadm — Used by
racrep.sh to
replicate RAC
information and to
configure settings.
racadm is the
wrapper script
which calls
racadm3 or
racadm4
depending on the
system
configuration.
•
syscfg — Used by
racrep.sh to
configure DRAC5.
lininst.sh —
Performs an
unattended
installation of a
supported Red Hat
®
Enterprise Linux
®
Server operating
system.
• tkenvset.sh —
Used by
lininst.sh to
inform the task
scripts where to
find the DTK
utilities, scripts,
and
configuration
files.
•
grub — Used to
install the
operating system
in conjunction
with the
unattended
answer
file. It
also uses the
following images
in conjunction
with the
unattended
answer
file to
perform
unattended
operations:
tkenvset.sh — Sets
the path of the
DTK installation
and variables for
the system to be
deployed and
configured. The
variables and paths
specified in this
file must be
specified before
any of the other
supporting scripts
can be used.
• syscfg — Used
by
tkenvset.sh to
discover the
system type.