Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
3 = Enabled
4 = Disabled
USBPortsUserAccessible Enables or Disables user accessible USB ports.
The following values are defined:
1 = Other
2 = Unsupported
3 = All Ports Off
4 = All Ports On
5 = Only Back Ports On
USBRearDual Enables or Disables Rear Dual USB ports.
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
USBRearQuad Enables or Disables Rear Quad USB ports (or Rear Triple stack on the OptiPlex(TM) 740).
The following values are defined:
1 = Other
2 = Unsupported
3 = On
4 = Off
USBWake Enables or Disables USB Wake setting.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
VideoExpansion Enables or Disables Video Expansion.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
VideoMemorySize Sets the Video Memory Size to the given value.
The following values are defined:
1 = Other
2 = Unsupported
3 = Auto
4 = Off
5 = 1MB
6 = 8MB
7 = 16MB
8 = 32MB
9 = 64MB
10 = 128MB
11 = 256MB
12 = 512MB
13 = 1024MB
VTforDirectIO Intel Virtualization Technology for Direct I/O (VT-d) – new chipset feature that enhances I/O support (DMA) when running a Virtual Machine Monitor.
The following values are defined:
1 = Other
2 = Unsupported
3 = Off
4 = On
WakeupOnLAN This property defines whether Wakeup On LAN is disabled, enabled for on-board NIC only or enabled for add-in NIC only. If Enabled with boot to NIC option is selected, the system boots from the NIC boot-
ROM upon a remote wakeup
The following values are defined:
1 = Other
2 = Unsupported
3 = Disabled
4 = Enabled for add-in NIC
5 = Enabled for on-board NIC
6 = Enabled for all NICs
7 = Enabled with boot to NIC
8 = LAN or WLAN
WakeupOnLANMethod This property defines the Wakeup On LAN method supported by the system.
The following values are defined:
1 = Other
2 = Unsupported
3 = Magic Packet
WiFiLocator Enables or Disables the WiFi Locator.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
WiFiCatcherChanges Permits or Denies WiFi Catcher changes. If the administrator password is not set, this setting will have no effect.
The following values are defined: