Reference Guide

Dell OpenManage Client Instrumentation Reference Guide
file:///T|/htdocs/SOFTWARE/smcliins/cli76/en/refgd/Index.htm[11/16/2012 2:58:47 PM]
NodeInterleave Enables or Disables Node Interleave.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
NoExecute Enables or Disables the No Execute (NX) flag.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
NumLock Enables or Disables Num Lock.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
Onboard1394 Enables or Disables on-board 1394 controller on next boot.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
OnboardModem Enables or Disables the Onboard Modem.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
OSInstallMode Enables or Disables OS Install Mode (Limit System Memory feature).
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
ParallelPortConfiguration This property defines the parallel port configuration.
The following values are defined:
1 = Other
2 = Unsupported
3 = Disabled
4 = LPT1
5 = LPT2
6 = LPT3
ParallelPortMode This property defines the parallel port mode.
The following values are defined:
1 = Other
2 = Unsupported
3 = AT
4 = PS/2
5 = ECP
6 = EPP
PasswordBypass Sets the Password Bypass feature to one of the supported settings.
The following values are defined:
1 = Other
2 = Unsupported
3 = Off
4 = Reboot Bypass
5 = Resume Bypass
6 = Reboot and Resume Bypass
PCCard Enables or Disables the PC Card.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
PCCardAnd1394 Enables or Disables the PC Card and 1394 devices.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled
4 = Disabled
PCISlots Enables or Disables the system's add-in PCI slots.
The following values are defined:
1 = Other
2 = Unsupported
3 = Enabled