Owner's Manual

Using Dell Online Diagnostics 21
The following table describes the icons in the Select Test(s) to Run pane.
Select All: Click to select all the devices and tests displayed in the Select
Test(s) to Run pane.
Remove All: Click to remove all the selected devices and tests in the Select
Test(s) to Run pane.
Select Test(s) to Run
Use this section to select devices and execute tests. The section is organized
according to the option you selected in the Selection Options list box.
If the display is grouped by devices:
• Select the check box next to the device, to select all the tests listed
for the device.
• You can also expand the device node and select individual tests that
you want to run.
If the display is grouped by tests:
• Select the check box next to the test, to select all the devices listed for
the test.
• You can also expand the test node and select the individual devices on
which you want to run the tests.
NOTE: You can select a device in the Diagnostic Information section, and view its
corresponding configuration details highlighted in the Configuration tab.
Indicates a device
Indicates a device with a non-critical error or associated warning
Indicates a test
Indicates a test with a non-critical error or warning associated.
A test warning message is displayed on mouseover