CLI Guide

netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
secadmin Exec Config
sysadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
netoperator
testadmin netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
Related
Commands
• userrole — create user roles.
userrole
Create user roles for the role-based security model.
Syntax
userrole name inherit existing-role-name
To delete a role name, use the no userrole name command. Note that the reserved
role names may not be deleted.
Parameters
name Enter a text string for the name of the user up to 63
characters. It cannot be one of the system defined roles
(sysadmin, secadmin, netadmin, netoperator).
inherit existing-
role-name
Enter the inherit keyword then specify the system defined
role to inherit permissions from (sysadmin, secadmin,
netadmin, netoperator).
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL.
Usage Information
Instead of using the system defined user roles, you can create a new user role that
best matches your organization. When you create a new user role, you first inherit
permissions from one of the system defined roles. Otherwise you would have to
create a user role from scratch. You then restrict commands or add commands to
1632
Security