CLI Guide

test cam-usage
Check the Input Policy Map configuration for the CAM usage.
Syntax
test cam-usage service-policy input policy-map stack-unit
{[number port-set portpipe number] | [all]}
Parameters
policy-map Enter the policy map name.
stack-unitnumber (OPTIONAL) Enter the keyword stack-unit then the
stack-unit slot number.
port-set portpipe
number
Enter the keywords port-set then the stack-unit port pipe
number. The range is from 0 or 1.
stack-unit all (OPTIONAL) Enter the keywords stack-unit all to indicate
all stack-unit.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information
This feature allows you to determine if the CAM has enough space available before
applying the configuration on an interface.
An input policy map with both Trust and Class-map configuration, the Class-map
rules are ignored and only the Trust rule is programmed in the CAM. In such an
instance, the Estimated CAM output column contains the size of the CAM space
required for the Trust rule and not the Class-map rule.
Quality of Service (QoS)
1449