CLI Guide
Version Description
9.8(0.0) Added the egress-queue keyword.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.1 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Example
Dell# show qos statistics te 1/1
Queue# Queued Queued Matched Matched Dropped
Bytes Pkts Pkts Bytes Pkts
(Cumulative) (Cumulative)
0 0 0 1883725 1883725000 0
1 0 0 1883725 1883725000 0
2 0 0 1883725 1883725000 0
3 0 0 1883725 1883725000 0
4 0 0 1883725 1883725000 0
5 0 0 1883724 1883724000 0
6 0 0 1883720 1883720000 0
7 0 0 1883720 1883720000 0
Dell#
Usage Information
The following list describes output of the show qos statistics command in
the example:
• Queue # — Queue Number.
• Queued Bytes — Snapshot of the byte count in that queue.
• Queued Pkts — Cumulative packet count in that queue.
• Matched Pkts — The number of packets that matched the class-map criteria.
NOTE: When you configure trust , matched packet counters are not
incremented in this field.
• Matched Bytes — The number of bytes that matched the class-map criteria.
NOTE: When you configure trust , matched byte counters are not
incremented in this field.
• Dropped Pkts — The total of the number of packets dropped for green, yellow
and out-of-profile.
Quality of Service (QoS)
1447