Administrator Guide

Link Aggregation Control Protocol (LACP)
This section contains commands for Dell EMC Networks’ implementation of the link aggregation control protocol (LACP) for creating
dynamic link aggregation groups (LAGs) — known as “port-channels” in the Dell EMC Networking OS.
NOTE: For static LAG commands based on the standards specified in the IEEE 802.3 Carrier sense multiple access with
collision detection (CSMA/CD) access method and physical layer specifications, see Port Channel Commands .
Topics:
• clear lacp counters
• debug lacp
• lacp long-timeout
• lacp port-priority
• lacp system-priority
• port-channel-protocol lacp
• show lacp
clear lacp counters
Clear port channel counters.
Syntax
clear lacp port-channel-number counters
Parameters
port-channel-
number
Enter a port-channel number. The range is from 1 to 128.
Defaults Without a Port Channel specified, the command clears all Port Channel counters.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
28
848 Link Aggregation Control Protocol (LACP)