Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

581

582

583

584

585

586

587

588

589

590

Version Description

9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux

(PMUX) mode only.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series legacy

command.

Usage Information The Dell EMC Networking OS provides the capability of statically configuring the interface to which a multicast

router is attached. To configure a static connection to the multicast router, enter the ip igmp snooping

mrouter interface command in the VLAN context. The interface to the router must be a part of the VLAN

where you are entering the command.

ip igmp snooping querier

Enable IGMP querier processing for the VLAN interface.

Syntax

ip igmp snooping querier

To disable IGMP querier processing for the VLAN interface, use the no ip igmp snooping querier

command.

Defaults Not configured.

Command Modes INTERFACE VLAN — (conf-if-vl-n)

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.