Administrator Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
Usage Information
The power inline mode command allows you to manage inline power supply on the stack unit. You can
configure class or static mode to manage inline power in a stack unit.
When class mode is configured, maximum power for the particular class of device is allocated. Class mode
supports power allocation via Layer 2 classification and power negotiation by Link Layer Discovery Protocol
(LLDP) 802.3at standard . When static mode is configured, the inline power is allocated based on the actual
power consumption by the powered device. Power negotiation via LLDP is not supported in static mode.
Example
Example for static mode:
DellEMC(conf)#power inline mode stack-unit 1 static
DellEMC#show power inline stack-unit 1
Global inline power Threshold : 10
Power Reserved for inline Power: 95W
Total Inline Power Consumed: 0W
Remaining inline power Available: 95W
Power Management Mode: Static
Interface Inline Power Inline Power Class Device PoE Port LLDP
Max / Alloc Consumed Type Priority Support
(Watts) (Watts)
--------- ------------ ------------ ------- ------ -------- ------
Gi 1/1 30.00/0.00 0.00 NO_DEVICE - high
DellEMC#
Example for class mode:
DellEMC(conf)#power inline mode stack-unit 1 class
DellEMC#show power inline stack-unit 1
Global inline power Threshold : 10
Power Reserved for inline Power: 95W
Total Inline Power Consumed: 0W
Remaining inline power Available: 95W
Power Management Mode: Class
Interface Inline Power Inline Power Class Device PoE Port LLDP
Max / Alloc Consumed Type Priority Support
(Watts) (Watts)
--------- ------------ ------------ ------- ------ -------- ------
Gi 1/1 0.00 /0.00 0.00 NO_DEVICE -
high -
DellEMC#
power inline restore
You can use this command to enable the temporarily suspended PoE power supply to all the ports in a stack unit.
Syntax
power inline restore stack-unit unit number
Parameters
stack-unit unit
number
Enter the keyword stack-unit and the stack-unit number. Range is from 1 to 12.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant DellEMC
Networking OS Command Line Reference Guide.
1164 Power over Ethernet (PoE)