Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1091

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.1.(0.0) Introduced on the S4810 and Z9000.

8.3.19.0 Introduced on the S4820T.

7.8.1.0 Added support for the C-Series.

7.4.1.0 Introduced on the E-Series.

Usage Information

Setting a priority of 0 makes the router ineligible for election as a Designated Router or Backup Designated

Router.

Use this command for interfaces connected to multi-access networks, not point-to-point networks.

ipv6 router ospf

Enable OSPF for IPv6 router configuration.

Syntax

ipv6 router ospf process-id [vrf vrf-name]

To exit OSPF for IPv6, use the no ipv6 router ospf process-id command.

Parameters

process-id

Enter the process identification number. The range is from 1 to 65535.

vrf

vrf-name

(Optional) Enter the keyword vrf followed by the name of the VRF to install IPv6 routes in

that VRF.

Defaults None

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.