User manual

debug fip snooping
Enable debugging on FIP snooping.
S4820T
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | tx]
Parameters
all Enter the keyword all to enable debugging on all the
options.
acl Enter the keyword acl for ACL-specific debugging.
error Enter the keyword error for error-specific debugging.
ifm Enter the keyword ifm for IFM-specific debugging.
info Enter the keyword info for information-specific debugging.
ipc Enter the keyword ipc for IPC-specific debugging.
tx Enter the keyword tx for packet transmit-specific
debugging.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
debug fip snooping rx
Enable debugging for FIP snooping receive-specific packets.
S4820T
Syntax
debug fip-snooping rx packet-type [all | discovery | virtual-
link-instantiation | virtual-link-maintenance| vlan-discovery]
[interface]
704
FIP Snooping