User manual

default-metric
Change the default metric for routes. To ensure that all redistributed routes use the same metric value,
use this command with the redistribute command.
S4820T
Syntax
default-metric number
To return the default metric to the original values, use the no default-metric
command.
Parameters
number Specify a number. The range is from 1 to 16. The default is 1.
Defaults 1
Command
Modes
ROUTER RIP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
Usage
Information
This command ensures that route information being redistributed is converted to
the same metric value.
Related
Commands
redistribute — allows you to redistribute routes learned by other methods.
Routing Information Protocol (RIP)
1515