System information

Security Admin
l User Authentication Mode — Selects the authentication or authentication sequence required.
¡  Local Only — The switch authenticates the user.
¡  Local then Remote — The switch attempts to authenticate the user first, and then a RADIUS server attempts to authenticate the user.
¡  Remote then Local — A RADIUS server attempts to authenticate the user first, and then the switch attempts to authenticate the user.
¡  Remote Only — A RADIUS server authenticates the user.
l RADIUS Server IP Address — Identifies the IP address of the RADIUS server.
l RADIUS Shared Secret — Specifies the text string that is shared between the switch and the RADIUS server.
l IP Filtering — Allows up to 16 IP addresses to access the switch management function, if enabled.
l Password Admin — Enables or disables password protection.
l Allowed IP Addresses — You can enter up to 16 IP addresses in the Allowed IP Address table.
l Disable Telnet/Web Access (Console Only) — Provides an option to enable or disable Telnet or Web access to the switch.



NOTE: The default password is switch.