User's Manual

52 End-to-End Hardware Management
The Overview provides information on key host server attributes,
including individual component health, identification, hypervisor, and
firmware information.
•
Component Health is a graphical representation of the status of all
major host server components: system chassis, power supply,
temperature, fans, voltage, processors, batteries, intrusion, hardware
log, power management, and memory. The available status states are:
• Healthy (green check mark) - component operating normally
• Warning (yellow triangle with exclamation point) - component
has a non-critical error
• Critical (red X) - component has a critical failure
• Unknown (question mark) - status is unknown for the component
A global health status is displayed in the upper-right header bar.
•
Server Information provides Identification , Hypervisor, and
Firmware
information, such as:
• Host name, power state, iDRAC IP address, console IP address,
connection profile in use, model, service tag and asset tag
numbers, number of days left on the warranty, and when the last
inventory scan was performed
• Hypervisor, BIOS firmware, and iDRAC firmware versions
•
Recent System Log Entries provide the 10 most recent system event
log entries. Click
Details to launch the System Event Log window
that displays additional log details.
4 Select Hardware Inventory to display a list and further details on all
components installed in host system, including
:
• Field-replaceable units (FRUs) - DIMMS, system planar, power
supplies, backplanes, controller cards, etc.
• Memory - Number of slots available and in use, maximum capacity
and amount of memory in use, and details on individual DIMMs.
• Network Interface Cards (NICs) - Number of installed cards and
details on individual NICs.
• PCI Slots - Total available and number in use, and details on
individual slots.