Owner's Manual

Troubleshooting and Frequently Asked Questions 113
An error occurred. One or
more settings may not be
restored.
An error occurred when restoring Hardware Advanced
Configuration settings. To resolve this issue:
1 Reboot the system.
2 Re-enter USC-LCE by pressing the <F10> key.
Re-open the Advanced Configuration screen.
This feature is not
supported in this
configuration
Your modular system does not support the feature you
selected.
NFS Support is not present Type the correct NFS share name and retry.
No Share Name/Details
present
Type the correct share name or username and password,
and retry.
Failed to authenticate.
Invalid share name,
username, or password.
Type the correct share name or username and password,
and retry.
Invalid Catalog File Type the correct path to the catalog file, or the correct
catalog name.
Could not Connect the
Share
This error may occur due to temporary network
problems. If this issue persists, check the network
connection and then retry.
Network Share Mount
Failed
This error may occur due to temporary network
problems. If this issue persists, check the network
connection and then retry.
Requested operation
completed successfully.
Error occurred while
shutting down the system.
Shutdown manually.
Press the power button on the system to shutdown
manually.
One or more of following
links will be disabled if the
required hardware is not
present in the system.
Ensure that a healthy and licensed vFlash SD card is
present in the system.
Table 5-3. USC-LCE Error Messages and Resolutions (continued)
Error Message Resolution
USC_USC-LCE.book Page 113 Monday, June 30, 2014 2:56 PM