User Guide

Removing and Replacing Parts 4-23
L
CD Assembly
The LCD assembly consists of the display assembly and its related components.
The subsections that follow provide removal and replacement procedures for
the components of the LCD assembly.
Figure 4-18. LCD Assembly Removal
To remove the LCD assembly, follow these steps:
1. With the computer closed and the back facing you, remove the two
hinge covers.
Pop off both of the covers with the heel of your palm; or insert your finger-
tips or a scribe between each cover and the LCD assembly, and then lift the
covers sideways until they are released from the catches holding them to the
computer.
2. Remove hinge screws H1, H2, H3, and H4.
3. Remove the flex-cable cover.
LCD assembly
hinge covers (2)
H1
H2
H3
H4
flex-cable cover
(screws H1–H4
are 5 mm)
5 mm