Owners Manual

6 Perform the following steps as shown in the illustration:
a Remove the screws that secure the display assembly to the computer [1].
b Lift the display assembly to remove from the computer [2].
Installing the Display Assembly
1 Route the WWAN, WLAN, and display-assembly cables through their respective routing channels on the base chassis and connect to
their connectors.
2 Place the display assembly onto the computer.
3 Tighten the screws to secure the display assembly to the computer.
4 Place the metal bracket on the display-assembly cable and tighten the screw to secure the display-assembly cable.
5 Install:
a palmrest
b hard drive
c keyboard
d keyboard trim
e base cover
f battery
30
Disassembly and reassembly