Service Manual

Back to Contents Page
 LED Cover
Service Manual
Removing the LED Cover
Replacing the LED Cover
Removing the LED Cover


1. Follow the procedures in Before Working on Your Computer.

2. Close the display and turn the computer over.

3. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).

4. Remove the hinge covers (see Removing the Hinge Covers).

5. Remove the display assembly (see Display).

6. Turn the computer upside down and locate the four tabs in the battery bay that secure the LED cover to the top of the computer. Using a plastic scribe,
gently push on the tabs to release the LED cover.
Replacing the LED Cover


1. Working at an angle, snap the LED cover into place one tab at a time.

2. Replace the display assembly (see Display).

3. Replace the hinge covers (see Replacing the Hinge Covers).

4. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly).
Back to Contents Page

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1
LED cover
2
scribe
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.