Dell™ Latitude™ D631 User’s Guide Model PP18L w w w. d e l l . c o m | s u p p o r t . d e l l .
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable.
Contents 1 Finding Information 2 About Your Computer Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Left Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Right Side View Back View 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Bottom View 3 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Storing a Battery . Battery Errors. 5 Using the Keyboard Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Key Combinations . . . . . . . . . . . . . . . . .
Setting Up a Network in the Microsoft® Windows® XP Operating System . . Setting Up a Network in the Microsoft Windows Vista® Operating System . Wireless Local Area Network . 50 . 50 . . . . . . . . . . . . . . . . . . . . . . . . . 50 What You Need to Establish a WLAN Connection . . . . . . . . . . . . . 50 Checking Your Wireless Network Card . . . . . . . . . . . . . . . . . . . 50 Setting Up a New WLAN Using a Wireless Router and a Broadband Modem 51 Connecting to a WLAN . . . . . . . . . . . . .
Installing a PC Card PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Removing a Card or Blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 10 Securing Your Computer Security Cable Lock Smart Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 About Smart Cards . .
Starting the Dell Diagnostics From the Drivers and Utilities Media Dell Diagnostics Main Menu . . . . . . . . . . . . . . . . . . . . Dell Support Utility . . . . . 80 81 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Accessing the Dell Support Utility . . Clicking the Dell Support Icon . . . . Double-Clicking the Dell Support Icon Drive Problems . . . . . . . . . . . . . . . . . . . . 82 82 83 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 . . . . . . . . .
Scanner Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sound and Speaker Problems . . . . . . . . . . . . . . . . . . . . . . . . . . No sound from integrated speakers No sound from external speakers . No sound from headphones . . . . 97 . . . . . . . . . . . . . . . . . . . . 97 97 98 . . . . . . . . . . . . . . . . . . . . . . . . . 98 . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Touch Pad or Mouse Problems Video and Display Problems . 96 . . . . . . . . .
14 Adding and Replacing Parts Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recommended Tools . . . . . . . . . Turning Off Your Computer . . . . . . Before Working Inside Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Hinge Cover Keyboard . . . . . . . . . . . . . . . . . .
17 Getting Help Obtaining Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Support and Customer Service DellConnect . . . . . . . . . . . . . . . . Online Services . . . . . . . . . . . . . . AutoTech Service . . . . . . . . . . . . . Automated Order-Status Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Problems With Your Order .
1 Finding Information NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may not be available in certain countries. NOTE: Additional information may ship with your computer. What Are You Looking For? Find It Here • • • • Drivers and Utilities Media NOTE: The Drivers and Utilities media may be optional and may not ship with your computer.
What Are You Looking For? Find It Here • • • • Quick Reference Guide NOTE: This document may be optional and may not ship with your computer. How to set up my computer Basic troubleshooting information How to run the Dell Diagnostics How to open my computer NOTE: This document is available as a PDF at support.dell.com. • • • • • • Warranty information Terms and Conditions (U.S.
What Are You Looking For? Find It Here • Solutions — Troubleshooting hints and tips, articles from technicians, and online courses, frequently asked questions • Community — Online discussion with other Dell customers • Upgrades — Upgrade information for components, such as memory, the hard drive, and the operating system • Customer Care — Contact information, service call and order status, warranty, and repair information • Service and support — Service call status and support history, service contract, o
What Are You Looking For? Find It Here • Information on network activity, the Power Management Dell QuickSet Help Wizard, hotkeys, and other items controlled by Dell To view Dell QuickSet Help, right-click the QuickSet QuickSet. ® ® icon in the Microsoft Windows taskbar. For more information on Dell QuickSet, see "Dell™ QuickSet" on page 135. • How to reinstall my operating system Operating System CD NOTE: The Operating System CD may be optional and may not ship with your computer.
2 About Your Computer Front View 1 2 3 13 12 4 11 10 5 9 8 7 6 About Your Computer 15
1 display latch 2 display 3 power button 4 device status lights 5 keyboard 6 touch pad 7 fingerprint reader (optional) 8 touch pad buttons/track stick buttons 9 track stick 11 volume control buttons 12 ambient light sensor 10 keyboard status lights 13 mute button DISPLAY LATCH DISPLAY — Press this button to release the display latch and open the display. — For more information about your display, see "Using the Display" on page 43.
Turns on when you turn on the computer and blinks when the computer is in a power management mode. Turns on when the computer reads or writes data. NOTICE: To avoid loss of data, never turn off the computer while the light is flashing. Turns on steadily or blinks to indicate battery charge status. Turns on when wireless devices are enabled. Turns on when Bluetooth® wireless technology is enabled. To enable or disable Bluetooth wireless technology, move the wireless switch to the "on" position.
KEYBOARD STATUS LIGHTS The green lights located above the keyboard indicate the following: 9 Turns on when the numeric keypad is enabled. A Turns on when the uppercase letter function is enabled. Turns on when the scroll lock function is enabled. VOLUME CONTROL BUTTONS — Press these buttons to adjust the volume.
Left Side View 1 2 3 4 5 6 7 8 9 1 security cable slot 2 air vents 3 audio connectors 4 smart card slot (with blank) 5 1394 connector 6 wireless switch 8 PC Card slot 9 hard drive 7 ™ Wi-Fi Catcher light — Lets you attach a commercially available antitheft device to the computer (see "Security Cable Lock" on page 69). SECURITY CABLE SLOT — The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating.
Attach record/playback devices, such as cassette players and CD players, to the connector. Attach headphones or speakers to the Attach a microphone to the SMART CARD SLOT connector. connector. (WITH BLANK) Supports one smart card. Smart cards provide a variety of functions, including security features and data storage. The blank prevents foreign matter from entering the interior of the computer when a smart card is not installed in the smart card slot.
– Off: No signal found NOTE: The Dell Wi-Fi Catcher Network Locator light appears only when the computer is turned off and wireless networking is activated in the system setup program. While working in Microsoft Windows operating systems, the light is designed not to appear. PC C A R D S L O T — Supports one PC Card, such as a modem or network adapter.
US B C O N N E C T O R S ( 2) Connect USB devices, such as a mouse, keyboard, or printer. Back View 1 2 3 4 5 6 7 1 network connector (RJ-45) 2 modem connector (RJ-11) 3 USB connectors (2) 4 serial connector 5 video connector 6 AC adapter connector 7 air vents CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a low-airflow environment, such as a closed briefcase, while it is running.
MODEM CONNECTOR ( R J - 1 1) Connect the telephone line to the modem connector. For information on using the modem, see the online modem documentation supplied with your computer (see "Finding Information" on page 11). US B C O N N E C T O R S ( 2) Connects USB devices, such as a mouse, keyboard, or printer. SERIAL CONNECTOR Connects serial devices, such as a mouse or handheld device. VIDEO CONNECTOR Connects video devices, such as a monitor.
The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned either on or off. CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage.
Bottom View 1 2 8 3 7 4 6 5 1 battery charge gauge/health gauge 2 battery 3 battery-bay latch releases (2) 4 locking screw (if present) 5 memory module cover 6 docking-device connector 7 air vents 8 hard drivee BATTERY CHARGE GAUGE/HEALTH GAUGE Battery Charge" on page 32).
M E M O R Y M O D U L E C O V E R — Covers the compartment that contains the second memory module connector (DIMM B) (see "Memory" on page 146). DOCKING-DEVICE CONNECTOR — Lets you attach your computer to a docking device. See the Dell documentation that came with your docking device for more information. — The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating.
3 Transferring Information to a New Computer The Microsoft® Windows® XP operating system provides the Files and Settings Transfer Wizard to move data from a source computer to a new computer. You can transfer data such as: • E-mail messages • Toolbar settings • Window sizes • Internet bookmarks You can transfer the data to the new computer over a network, serial connection or Easy Transfer Cable for Windows Vista®.
To copy data from the old computer: 1 On the old computer, insert the Windows XP Operating System CD. 2 On the Welcome to Microsoft Windows XP screen, click Perform additional tasks. 3 Under What do you want to do?, click Transfer files and settings. 4 On the Files and Settings Transfer Wizard welcome screen, click Next. 5 On the Which computer is this? screen, click Old Computer and click Next. 6 On the Select a transfer method screen, click the transfer method you prefer.
3 In the Open field on the Run window, browse to the path for fastwiz (on the appropriate removable media) and click OK. 4 On the Files and Settings Transfer Wizard welcome screen, click Next. 5 On the Which computer is this? screen, click Old Computer→ Next. 6 On the Select a transfer method screen, click the transfer method you prefer. 7 On the What do you want to transfer? screen, select the items you want to transfer and click Next.
7 From the destination computer, view the transfer and wait for the indication that the transfer is complete. 8 Select Close. You are prompted to restart the computer. 9 Select Yes. The computer reboots and the transfer is complete.
4 Using a Battery Battery Performance NOTE: For information about the Dell warranty for your computer, see the Product Information Guide or separate paper warranty document that shipped with your computer. For optimal computer performance and to help preserve BIOS settings, operate your Dell™ portable computer with the main battery installed at all times. One battery is supplied as standard equipment in the battery bay.
CAUTION: Do not dispose of batteries with household waste. When your battery no longer holds a charge, call your local waste disposal or environmental agency for advice on disposing of a lithium-ion battery. See "Battery Disposal" in the Product Information Guide. CAUTION: Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture, incinerate, disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children.
Check the Battery Health NOTE: You can check battery health in one of two ways: by using the charge gauge on the battery as described below and by using the Battery Meter in Dell QuickSet. For information about QuickSet, right-click the icon in the taskbar, and click Help. To check the battery health using the charge gauge, press and hold the status button on the battery charge gauge for at least 3 seconds.
Power Management Modes Standby and Sleep Mode Standby mode (sleep mode in Microsoft Windows Vista®) conserves power by turning off the display and the hard drive after a predetermined period of inactivity (a time-out). When the computer exits standby or sleep mode, it returns to the same operating state it was in before entering standby or sleep mode. NOTICE: If your computer loses AC and battery power while in standby or sleep mode, it may lose data.
NOTE: Some PC Cards or Express Cards may not operate correctly after the computer exits hibernate mode. Remove and reinsert the card (see "Removing a Card or Blank" on page 66), or simply restart (reboot) your computer. To exit hibernate mode, press the power button. The computer may take a short time to exit hibernate mode. You cannot make the computer exit hibernate mode by pressing a key or touching the touch pad or track stick.
Replacing the Battery CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The battery is designed to work with your Dell™ computer. Do not use a battery from other computers with your computer.
Storing a Battery Remove the battery when you store your computer for an extended period of time. A battery discharges during prolonged storage. After a long storage period, recharge the battery fully (see "Charging the Battery" on page 35) before you use it. Battery Errors To address error codes generated by the battery, refer to "Error Messages" on page 86.
Using a Battery
5 Using the Keyboard Numeric Keypad numeric keypad The numeric keypad functions like the numeric keypad on an external keyboard. Each key on the keypad has multiple functions. The keypad numbers and symbols are marked in blue on the right of the keypad keys. To type a number or symbol, hold down and press the desired key. • To enable the keypad, press . The • To disable the keypad, press again. 9 light indicates that the keypad is active.
Battery Displays the Dell™ QuickSet Battery Meter (see "Dell™ QuickSet Battery Meter" on page 32). Display Functions Switches the video image to the next display option. The options include the integrated display, an external monitor, and both displays simultaneously. Scales between wide-screen and standard aspect ratio video resolutions.
Windows logo key and Opens the Search Results-Computer dialog box (if the computer is connected to a network). Windows logo key and Opens the System Properties dialog box. To adjust keyboard operation, such as the character repeat rate, open the Control Panel, click Printers and Other Hardware, and click Keyboard. For information about the Control Panel, access the Help and Support Center (click Start→ Help and Support).
You can also use the track stick to move the cursor. Press the track stick left, right, up, or down to change the direction of the cursor on the display. Use the track stick and track stick buttons as you would use a mouse. Customizing the Touch Pad and Track Stick You can use the Mouse Properties window to disable the touch pad and track stick or adjust their settings. 1 Open the Control Panel, and then click Mouse.
6 Using the Display Adjusting Brightness When a Dell™ computer is running on battery power, you can conserve power by setting the brightness to the lowest comfortable setting by pressing and the up- or down-arrow key on the keyboard. NOTE: Brightness key combinations only affect the display on your portable computer, not monitors or projectors that you attach to your portable computer or docking device.
2 Under Pick a category, click Appearance and Themes. 3 Under Pick a task..., click the area you want to change, or under or pick a Control Panel icon, click Display. 4 In the Display Properties window, click the Settings tab. 5 Try different settings for Color quality and Screen resolution. NOTE: As the resolution increases, icons and text appear smaller on the screen. If the video resolution setting is higher than that supported by the display, the computer enters pan mode.
2 Click the monitor 2 icon, uncheck the Extend my Windows desktop onto this monitor option, and then click Apply. If necessary, press to bring the screen image back to the computer display. Swapping Primary and Secondary Displays To swap your primary and secondary display designations (for example, to use your external monitor as your primary display after docking): 1 Click the Start button and click Control Panel. 2 Under Pick a category, click Appearance and Themes. 3 Under Pick a task...
The ALS is disabled when your computer is shipped to you. If you enable the ALS and then use any of the display brightness key combinations, the ALS is disabled and the display brightness is increased or decreased accordingly. Dell™ QuickSet allows you to enable or disable the ALS feature. You can also adjust maximum and minimum brightness settings that are activated when you enable the ALS feature. For more information about QuickSet, right-click the icon in the taskbar, and click Help.
Using the Desktop Shortcut When you install the ATI Catalyst Control Center, the setup wizard provides an option to place a shortcut on the desktop. If you select this option, you can double-click the desktop shortcut to start the ATI Catalyst Control Center. Using Hot Keys You can press the predefined combination of keys to launch Catalyst Control Center, or you can define your own hot key sequence by using the Catalyst Control Center's Hotkey Manager.
Using the Display
7 Setting Up and Using Networks Setting up a computer network provides connectivity between your computer and the Internet, another computer, or a network. For example, with a network set up in a home or small office you can print to a shared printer, access drives and files on another computer, browse other networks, or access the Internet. You can set up a local area network (LAN) using a network or broadband modem cable or set up a wireless LAN (WLAN).
Setting Up a Network in the Microsoft® Windows® XP Operating System 1 Click Start→ All Programs→ Accessories→ Communications→ Network Setup Wizard→ Next→ Checklist for creating a network. NOTE: Selecting the connection method labeled This computer connects directly to the Internet enables the integrated firewall provided with Windows XP Service Pack 2 (SP2). 2 Complete the checklist. 3 Return to the Network Setup Wizard and follow the instructions in the wizard.
• The order confirmation for your computer Start Button and Connect To Option In Microsoft Windows XP, click Start→ Connect To→ Show all connections. In Microsoft Windows Vista, click → Connect To→ View network computers and devices. If Wireless Network Connection does not appear under LAN or High-Speed Internet, you may not have a wireless network card. If Wireless Network Connection appears, you have a wireless network card.
8 Insert a network cable into the network (RJ-45) connector on the unpowered broadband modem. 9 Connect the other end of the network cable into the Internet network (RJ-45) connector on the unpowered wireless router. 10 Ensure that no network or USB cables, other than the network cable connecting the modem and the wireless router, are connected to the broadband modem. NOTE: Restart your wireless equipment in the order described below to prevent a potential connection failure.
• Your wireless network card’s client utility • The Windows XP or Windows Vista operating system To determine which wireless configuration utility is managing your wireless network card in Windows XP: 1 Click Start→ Settings→ Control Panel→ Network Connections. 2 Right-click the Wireless Network Connection icon, and then click View Available Wireless Networks.
The wireless activity indicator displays whether your computer’s integrated wireless devices are enabled or disabled. When you turn the wireless networking function on or off, the wireless activity indicator changes to display the status. For more information about the Dell QuickSet wireless activity indicator, right-click the QuickSet icon in the taskbar and select Help.
1 Click Start→ Help and Support→ Use Tools to view your computer information and diagnose problems. 2 Under Tools, click My Computer Information→ Find information about the hardware installed on this computer. On the My Computer Information - Hardware screen, you can view the type of Mobile Broadband card installed in your computer as well as other hardware components. NOTE: The Mobile Broadband card is listed under Modems.
To monitor the status of your wireless device, see "Monitoring the Status of the Wireless Network Card Through Dell QuickSet" on page 53. Managing Your Network Settings Through the Dell QuickSet Location Profiler The Dell QuickSet Location Profiler helps you manage network settings that correspond to your computer’s physical location.
NOTE: Enabling Windows Firewall does not reduce the need for virus-checking software. For more information, click Start→ Control Panel→ Security→ Windows Firewall, or access the Help and Support Center (click Start→ Help and Support).
Setting Up and Using Networks
8 Using Multimedia Playing CDs or DVDs NOTICE: Do not press down on the CD/DVD tray when you open or close it. Keep the tray closed when you are not using the drive. NOTICE: Do not move the computer while playing CDs or DVDs. 1 Press the eject button on the front of the drive. 2 Pull out the tray. 3 Place the disc, label side up, in the center of the tray and snap the disc onto the spindle.
4 Push the tray back into the drive. To format CDs for storing data, to create music CDs, or to copy CDs, see the CD software that came with your computer. NOTE: Ensure that you follow all copyright laws when you create CDs. A CD player includes the following basic buttons: Play. Move backward within the current track. Pause. Move forward within the current track. Stop. Go to the previous track. Eject. Go to the next track. A DVD player includes the following basic buttons: Stop.
This section applies only to computers that have a CD-RW, DVD+/-RW, or CD-RW/DVD (combo) drive. NOTE: The types of CD or DVD drives offered by Dell may vary by country. The following instructions explain how to make a copy of a CD or DVD using Roxio Creator Plus - Dell Edition. You can also use Roxio Creator Plus for other purposes, such as creating music CDs from audio files stored on your computer or backing up important data.
CD-Writable Drives Media Type Read Write Rewritable CD-R Yes Yes No CD-RW Yes Yes Yes Read Write Rewritable DVD-Writable Drives Media Type CD-R Yes Yes No CD-RW Yes Yes Yes DVD+R Yes Yes No DVD-R Yes Yes No DVD+RW Yes Yes Yes DVD-RW Yes Yes Yes DVD+R DL Yes Yes No DVD-R DL Maybe No No DVD-RAM Maybe No No Helpful Tips 62 • Use Microsoft® Windows® Explorer to drag and drop files to a CD-R or CD-RW only after you start Roxio Creator Plus and open a Creator
Adjusting the Volume NOTE: When the speakers are muted, you do not hear the CD or DVD playing. 1 Open the Volume Control window. 2 Click and drag the bar in the Volume Control column and slide it up or down to increase or decrease the volume. For more information on volume control options, click Help in the Volume Control window. The Volume Meter displays the current volume level, including mute, on your computer.
Microsoft Windows Vista® Operating System 1 Click the Windows Vista Start button, Personalization. , and click Control Panel→ Appearance and 2 Under Personalization, click Adjust Screen Resolution. 3 Under Resolution: click and drag the bar to reduce the resolution setting. 4 In the drop-down menu under Colors, click Medium (16 bit) and click OK.
9 Using Cards NOTE: Electrical and electronic devices are sensitive to electrostatic discharge (ESD). If a substantial ESD occurs, the device may reset and the device software may attempt to reinitialize a connection. If the software is not operational after an ESD occurrence, restart the modem software program. Card Types PC Cards See "PC Card" on page 145 for information on supported PC Cards. NOTE: A PC Card is not a bootable device.
Installing a PC Card You can install a PC Card in the computer while the computer is running. The computer automatically detects the card. PC Cards are generally marked with a symbol (such as a triangle or an arrow) to indicate which end to insert into the slot. The cards are keyed to prevent incorrect insertion. If card orientation is not clear, see the documentation that came with the card.
NOTICE: Click the icon in the taskbar to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration utility, you could lose data. Do not attempt to eject a card by pulling its cable, if one is attached. Press the latch and remove the card or blank. For some latches, you must press the latch twice: once to pop the latch out, and then a second time to pop the card out.
Using Cards
10 Securing Your Computer Security Cable Lock NOTE: Your computer does not ship with a security cable lock. A security cable lock is a commercially available antitheft device. To use the lock, attach it to the security cable slot on your Dell™ computer. For more information, see the instructions included with the device. NOTICE: Before you buy an antitheft device, ensure that it will work with the security cable slot on your computer.
About Smart Cards Smart cards are portable credit-card shaped devices with internal integrated circuits. The top surface of the smart card usually contains an embedded processor under the gold contact pad. The combination of the small size and integrated circuits make smart cards valuable tools for security, data storage, and special programs.
Passwords Passwords prevent unauthorized access to your computer. When using passwords, observe the following guidelines: • Choose a password that you can remember, but not one that is easy to guess. For example, do not use the names of family members or pets for passwords. • It is recommended that you do not write down your password. If you do write it down, however, ensure that the password is stored in a secure place. • Do not share your password with other people.
A primary (or system) password, an administrator password, and a hard drive password all prevent unauthorized access to your computer in different ways. The following table identifies types and features of passwords available on your computer.
If you have assigned an administrator password, you can use it instead of the primary password. The computer does not specifically prompt you for the administrator password. Using an Administrator Password The administrator password is designed to give system administrators or service technicians access to computers for repair or reconfiguration. The administrators or technicians can assign identical administrator passwords to groups of computers, allowing you to assign a unique primary password.
NOTE: The administrator password provides access to the computer, but it does not provide access to the hard drive when a hard drive password is assigned. Trusted Platform Module (TPM) NOTE: Computers shipping into China are not equipped with the TPM feature. NOTE: The TPM feature supports encryption only if the operating system supports TPM. For more information, see the TPM software documentation and the help files that came with the software.
• Pre-boot authentication (using a fingerprint reader, smart card, or password) • Encryption • Private information management Activating the Security Management Software NOTE: You must first enable the TPM in order for the security management software to have full functionality. 1 Enable the TPM feature (see "Enabling the TPM Feature" on page 74). 2 Load the security management software: a Turn on (or restart) your computer. b When the DELL™ logo appears, press immediately.
NOTE: If you know where the computer was lost or stolen, call a law enforcement agency in that area. If you do not know, call a law enforcement agency where you live. • If the computer belongs to a company, notify the security office of the company. • Contact Dell customer service to report the missing computer. Provide the computer Service Tag, the case number, and the name, address, and phone number of the law enforcement agency to which you reported the missing computer.
Cleaning Your Computer CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. Computer, Keyboard, and Display CAUTION: Before you clean your computer, disconnect the computer from the electrical outlet and remove any installed batteries. Clean your computer with a soft cloth dampened with water. Do not use liquid or aerosol cleaners, which may contain flammable substances.
NOTICE: To avoid damaging the surface, do not wipe in a circular motion around the disc. 2 With a soft, lint-free cloth, gently wipe the bottom of the disc (the unlabeled side) in a straight line from the center to the outer edge of the disc. For stubborn dirt, try using water or a diluted solution of water and mild soap. You can also purchase commercial products that clean discs and provide some protection from dust, fingerprints, and scratches. Cleaning products for CDs are also safe to use on DVDs.
11 Troubleshooting Dell™ Technical Update Service The Dell Technical Update service provides proactive e-mail notification of software and hardware updates for your computer. The service is free and can be customized for content, format, and how frequently you receive notifications. To enroll for the Dell Technical Update service, go to support.dell.com/technicalupdate. Dell Diagnostics Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 143) as you complete these checks.
2 Turn on (or restart) your computer. 3 Diagnostics can be invoked one of two ways: a When the DELL™ logo appears, press immediately. Select Diagnostics from the boot menu and press . NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again. NOTE: Before attempting option B, the computer must be powered down completely.
7 When the Dell Diagnostics Main Menu appears, select the test you want to run. Dell Diagnostics Main Menu 1 After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want. Option Function Express Test Performs a quick test of devices. This test typically takes 10 to 20 minutes and requires no interaction on your part. Run Express Test first to increase the possibility of tracing the problem quickly. Extended Test Performs a thorough check of devices.
Tab Function (continued) Configuration Displays your hardware configuration for the selected device. The Dell Diagnostics obtains configuration information for all devices from system setup, memory, and various internal tests, and it displays the information in the device list in the left pane of the screen. The device list may not display the names of all the components installed on your computer or all devices attached to your computer.
• View the Dell Support Utility settings • Access the help file for the Dell Support Utility • View frequently asked questions • Learn more about the Dell Support Utility • Turn the Dell Support Utility off Double-Clicking the Dell Support Icon Double-click the icon to manually check your computing environment, view frequently asked questions, access the help file for the Dell Support Utility, and view Dell Support settings.
Problems writing to a CD/DVD-RW drive C L O S E O T H E R P R O G R A M S — The CD/DVD-RW drive must receive a steady stream of data when writing. If the stream is interrupted, an error occurs. Try closing all programs before you write to the CD/DVDRW. TU R N O F F S T A N D B Y M O D E I N W I N D O W S B E F O R E W R I T I N G T O A CD/DVD-R W D I S C — Search for the keyword standby in the Windows Help and Support Center for information on power management modes.
NOTE: Connect the modem to an analog telephone jack only. The modem does not operate while it is connected to a digital telephone network. C H E C K T H E M I C R O S O F T O U T L O O K ® E X P R E S S S E C U R I T Y S E T T I N G S — If you cannot open your e-mail attachments: 1 In Outlook Express, click Tools, click Options, and then click Security. 2 Click Do not allow attachments to remove the checkmark. CHECK THE TELEPHONE LINE CONNECTION. CHECK THE TELEPHONE JACK.
Error Messages Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 143) as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. If the message is not listed, see the documentation for the operating system or the program that was running when the message appeared. A U X I L I A R Y D E V I C E F A I L U R E — The touch pad, track stick, or external mouse may be faulty.
H A R D - D I S K D R I V E C O N F I G U R A T I O N E R R O R — The computer cannot identify the drive type. Shut down the computer, remove the hard drive (see "Hard drive problems" on page 84), and boot the computer from a CD. Then shut down the computer, reinstall the hard drive, and restart the computer. Run the HardDisk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 79).
M E M O R Y D A T A L I N E F A I L U R E A T A D D R E S S , R E A D V A L U E E X P E C T I N G V A L U E — A memory module may be faulty or improperly seated. Reinstall the memory modules (see "Memory Problems" on page 92) and, if necessary, replace them. M E M O R Y D O U B L E W O R D L O G I C F A I L U R E A T A D D R E S S , R E A D V A L U E E X P E C T I N G V A L U E — A memory module may be faulty or improperly seated.
S H U T D O W N F A I L U R E — A chip on the system board may be malfunctioning. Run the System Set tests in the Dell Diagnostics (see "Dell Diagnostics" on page 79). T I M E - O F - D A Y C L O C K L O S T P O W E R — System configuration settings are corrupted. Connect your computer to an electrical outlet to charge the battery. If the problem persists, try to restore the data by entering the system setup program. Then immediately exit the program.
Keyboard Problems Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 143) as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTE: Use the integrated keyboard when running the Dell Diagnostics or the system setup program. When you attach an external keyboard, the integrated keyboard remains fully functional.
Lockups and Software Problems Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 143) as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. The computer does not start up E N S U R E T H A T T H E AC A D A P T E R I S F I R M L Y C O N N E C T E D T O T H E C O M P U T E R A N D T O T H E E L E C T R I C A L O U T L E T .
INFORMATION — • Ensure that the program is compatible with the operating system installed on your computer. • Ensure that your computer meets the minimum hardware requirements needed to run the software. See the software documentation for information. • Ensure that the program is installed and configured properly. • Verify that the device drivers do not conflict with the program. • If necessary, uninstall and then reinstall the program. B A C K U P Y O U R F I L E S I M M E D I A T E L Y.
Network Problems Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 143) as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. General C H E C K T H E N E T W O R K C A B L E C O N N E C T O R — Ensure that the network cable is firmly inserted into both the network connector on the back of the computer and the network connector.
• Radio Off – Ensure the Mobile Broadband card is enabled by viewing the status in the Dell Mobile Broadband Card Utility. If the card is disabled, enable the Mobile Broadband card by clicking the Turn Radio On button in the main screen of the Dell Mobile Broadband Card Utility. • Searching – The Dell Mobile Broadband Card Utility has not yet located a Mobile Broadband network. If the searching state persists, ensure that the signal strength is adequate.
1 Reinstall the battery. 2 Use the AC adapter to connect the computer to an electrical outlet. 3 Turn on the computer. NOTE: Battery operating time (the time the battery can hold a charge) decreases over time. Depending on how often the battery is used and the conditions under which it is used, you may need to purchase a new battery during the life of your computer.
Docking While the Computer Is Running If a computer is connected to the Dell D/Dock or Dell D/Port while the computer is running, presence of the docking device is ignored until the AC adapter is connected to the computer. AC Power Loss While the Computer Is Docked If a computer loses AC power while docked to the Dell D/Dock or Dell D/Port, the computer immediately goes into low-performance mode.
C H E C K T H E S C A N N E R D O C U M E N T A T I O N — See the scanner documentation for setup and troubleshooting information. U N L O C K T H E S C A N N E R — Ensure that your scanner is unlocked if it has a locking tab or button. RESTART THE COMPUTER AND TRY THE SCANNER AGAIN. CHECK THE CABLE CONNECTIONS — • See the scanner documentation for cable connection information. • Ensure that the scanner cables are securely connected to the scanner and the computer.
E L I M I N A T E P O S S I B L E I N T E R F E R E N C E — Turn off nearby fans, fluorescent lights, or halogen lamps to check for interference. R E I N S T A L L T H E A U D I O D R I V E R — See "Reinstalling Drivers and Utilities" on page 102. R U N T H E D E L L D I A G N O S T I C S — See "Dell Diagnostics" on page 79. NOTE: The volume control in some MP3 players overrides the Windows volume setting.
Video and Display Problems Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 143) as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. If the display is blank NOTE: If you are using a program that requires a higher resolution than your computer supports, it is recommended that you attach an external monitor to your computer.
R U N T H E V I D E O D I A G N O S T I C S T E S T S — If no error message appears and you still have a display problem, but the display is not completely blank, run the Video device group in the Dell Diagnostics. If the problem persists, contact Dell (see "Obtaining Assistance" on page 139).
12 Reinstalling Software Drivers What Is a Driver? A driver is a program that controls a device such as a printer, mouse, or keyboard. All devices require a driver program. A driver acts like a translator between the device and any other programs that use the device. Each device has its own set of specialized commands that only its driver recognizes. Dell ships your computer to you with required drivers already installed—no further installation or configuration is needed.
NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue. Scroll down the list to see if any device has an exclamation point (a yellow circle with a [!]) on the device icon. If an exclamation point is next to the device name, you may need to reinstall the driver or install a new driver (see "Reinstalling Drivers and Utilities" on page 102).
In most cases, the CD starts running automatically. If it does not, start Windows Explorer, click your CD drive directory to display the CD contents, and then double-click the autorcd.exe file. The first time that you run the CD, it might prompt you to install setup files. Click OK and follow the instructions on the screen to continue. 3 From the Language drop-down menu in the toolbar, select your preferred language for the driver or utility (if available).
2 Click Properties→ Device Manager. NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to enter the Device Manager. 3 Double-click the type of device for which you are installing the driver (for example, Audio or Video). 4 Double-click the name of the device for which you are installing the driver. 5 Click the Driver tab→ Update Driver→ Browse my computer for driver software.
Using Microsoft® Windows® System Restore The Windows operating systems provide a System Restore option which allows you to return your computer to an earlier operating state (without affecting data files) if changes to the hardware, software, or other system settings have left the computer in an undesirable operating state. Any changes that System Restore makes to your computer are completely reversible. NOTICE: Make regular backups of your data files.
3 Click Undo my last restoration and click Next. Enabling System Restore NOTE: Windows Vista does not disable System Restore regardless of low disk space. Therefore, the steps below apply only to Windows XP. If you reinstall Windows XP with less than 200 MB of free hard-disk space available, System Restore is automatically disabled. To see if System Restore is enabled: 1 Click Start→ Control Panel→ Performance and Maintenance→ System.
4 Restart the computer. When the DELL logo appears, press immediately. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again. NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program. 5 When the boot device list appears, highlight CD/DVD/CD-RW Drive and press .
Reinstalling Software
13 System Setup Program Overview NOTE: Your operating system may automatically configure most of the options available in the system setup program, thus overriding options that you set through the system setup program. (An exception is the External Hot Key option, which you can disable or enable only through the system setup program.) For more information on configuring features for your operating system, access the Help and Support Center (click Start→ Help and Support).
System Setup Screens NOTE: For information about a specific item on a system setup screen, highlight the item and see the Help area on the screen. On each screen, the system setup options are listed at the left. To the right of each option is the setting or value for that option. You can change settings that appear as white type on the screen. Options or values that you cannot change (because they are determined by the computer) appear less bright.
Performing a One-Time Boot You can set a one-time-only boot sequence without entering the system setup program. (You can also use this procedure to boot the Dell Diagnostics on the diagnostics utility partition on your hard drive.) 1 Shut down the computer through the Start menu. 2 If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions. 3 Connect the computer to an electrical outlet. 4 Turn on the computer.
System Setup Program
14 Adding and Replacing Parts Before You Begin This chapter provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that the following conditions exist: • You have performed the steps in "Turning Off Your Computer" on page 113 and "Before Working Inside Your Computer" on page 113. • You have read the safety information in your Dell™ Product Information Guide.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins. NOTICE: Only a certified service technician should perform repairs on your computer.
Hinge Cover CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the hinge cover.
1 Follow the instructions in "Before You Begin" on page 113. 2 Remove the hinge cover (see "Hinge Cover" on page 115). 1 2 3 4 5 6 1 screws (3) 2 keyboard tabs (5) 3 palm rest 4 pull-tab 5 keyboard-cable locking arm 6 keyboard cable connector NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard. 3 Remove the three screws across the top of the keyboard.
Internal Card With Bluetooth® Wireless Technology CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
6 Disconnect the card from the cable and remove the card from the computer. Coin-Cell Battery CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1 2 3 1 battery connector 2 coin-cell battery 3 mylar 4 Remove the battery connector from the connector on the system board. 5 Being careful not to break the plastic, slightly raise the corner of the mylar above the battery. 6 While holding the mylar, grasp the battery and pull out of the battery compartment. Memory You can increase your computer memory by installing memory modules on the system board. See "Specifications" on page 145 for information on the memory supported by your computer.
1 Follow the procedures in "Before You Begin" on page 113. 2 Remove the hinge cover (see "Hinge Cover" on page 115). 3 Remove the keyboard (see "Keyboard" on page 115). 1 2 1 memory module (DIMM A) 2 securing clips (2) NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-module securing clips.
2 1 1 securing clips (2 per connector) 2 memory module 5 Ground yourself and install the new memory module: NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure. a Align the notch in the module connector with the tab in the connector slot. b Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it.
2 Turn the computer bottom-side up, loosen the captive screw in the memory module cover, and then remove the cover. 1 2 1 memory module cover 2 captive screw NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-module securing clips.
2 1 1 securing clips (2 per connector) 2 memory module NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector. 4 Ground yourself and install the new memory module: NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure. a Align the notch in the module edge connector with the tab in the connector slot.
6 Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet. 7 Turn on the computer. As the computer boots, it detects the additional memory and automatically updates the system configuration information. To confirm the amount of memory installed in the computer, click Start→ Help and Support, and then click Computer Information. 8 Replace the memory module cover.
NOTICE: To prevent damage to the connector, do not use tools to spread the securing clips. 4 If a WLAN card is not already installed, go to step 5. If you are replacing a WLAN card, remove the existing card: a Disconnect the WLAN card from any attached cables. b Use your fingertips to carefully spread apart the metal securing tabs until the card pops up slightly. c Slide and lift the WLAN card out of its connector. NOTICE: The connectors are keyed to ensure correct insertion.
b Align the WLAN card with the connector at a 45-degree angle, and press the card into the connector until you feel a click. 1 2 1 WLAN card 2 antenna cable connectors NOTICE: To avoid damaging the WLAN card, never place cables on top of or under the card. NOTE: Your WLAN card may have two or three connectors, depending on the type of card you ordered. NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your WLAN card.
2 Remove the hinge cover (see "Hinge Cover" on page 115). 3 Remove the keyboard (see "Keyboard" on page 115). 1 1 Mobile Broadband card 2 2 antenna cables (2) NOTICE: To prevent damage to the connector, do not use tools to spread the securing clips. 4 If a Mobile Broadband card is not already installed, go to step 5. If you are replacing a Mobile Broadband card, remove the existing card: a Disconnect the Mobile Broadband card from any attached cables.
1 2 1 Mobile Broadband card 2 metal securing tabs (2) b Use your fingertips to carefully spread apart the metal securing tabs until the card pops up slightly. c Slide and lift the Mobile Broadband card out of its connector. NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card. NOTE: Do not insert a WLAN card into the Mobile Broadband card slot.
1 1 Mobile Broadband card 2 2 antenna cables (2) NOTICE: To avoid damaging the Mobile Broadband card, never place cables on top of or under the card and ensure that you route the cables properly. NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mobile Broadband card.
2 1 1 SIM card 2 metal brackets (2) NOTICE: Do not touch the SIM card connectors to protect the card from electrostatic discharge (ESD). To prevent ESD, hold the card in your hand before you insert or remove the card. 3 With the cut-off corner on the card facing away from the card slot, insert the SIM card into the slot so that it slides under the metal tabs on the sides. Hard Drive NOTE: You need the Operating System CD to install the Microsoft® Windows® operating system.
1 2 1 screws (2) 2 hard drive 2 Remove the hard drive screws on the bottom of the computer. NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting Against Electrostatic Discharge" in the Product Information Guide. 3 Slide the hard drive out of the computer. 4 Remove the new drive from its packaging. Save the original packaging for storing or shipping the hard drive. NOTICE: Use firm and even pressure to slide the drive into place.
hard drive foam packaging 132 Adding and Replacing Parts
Media Bay NOTE: If the device locking screw is not present, you can remove and install devices while the computer is running and connected to a docking device (docked). Removing Media Bay Devices NOTICE: To prevent damage to devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them. 1 If present, remove the device locking screw from the bottom of the computer.
Adding and Replacing Parts
15 Dell™ QuickSet NOTE: This feature may not be available on your computer. Dell™ QuickSet provides you with easy access to configure or view the following types of settings: • Network connectivity • Power management • Display • System information Depending on what you want to do in Dell™ QuickSet, you can start it by either clicking, doubleclicking, or right-clicking the QuickSet icon in the Microsoft® Windows® taskbar. The taskbar is located in the lower-right corner of your screen.
Dell™ QuickSet
16 Traveling With Your Computer Identifying Your Computer • Attach a name tag or business card to the computer. • Write down your Service Tag and store it in a safe place away from the computer or carrying case. Use the Service Tag if you need to report a loss or theft to law enforcement officials and to Dell. • Create a file on the Microsoft® Windows® desktop called if_found. Place information such as your name, address, and phone number in this file.
Travel Tips NOTICE: Do not move the computer while using the optical drive to prevent loss of data. NOTICE: Do not check the computer as baggage. • Consider disabling wireless activity on your computer to maximize battery operating time. To disable wireless activity, use the wireless switch (see "Enabling/Disabling the Dell™ Mobile Broadband Card" on page 55) • Consider changing your power management options to maximize battery operating time (see "Configuring Power Management Settings" on page 35).
17 Getting Help Obtaining Assistance CAUTION: If you need to remove the computer cover, first disconnect the computer power and modem cables from all electrical outlets. If you experience a problem with your computer, you can complete the following steps to diagnose and troubleshoot the problem: 1 See for information and procedures that pertain to the problem your computer is experiencing. 2 See "Dell Diagnostics" on page 79 for procedures on how to run Dell Diagnostics.
www.dell.com | support.dell.com DellConnect DellConnect is a simple online access tool that allows a Dell service and support associate to access your computer through a broadband connection, diagnose your problem and repair it all under your supervision. For more information, go to support.dell.com and click DellConnect. Online Services You can learn about Dell products and services on the following websites: www.dell.com www.dell.com/ap (Asian/Pacific countries only) www.dell.com/jp (Japan only) www.
AutoTech Service Dell's automated support service—AutoTech—provides recorded answers to the questions most frequently asked by Dell customers about their portable and desktop computers. When you call AutoTech, use your touch-tone telephone to select the subjects that correspond to your questions. For the telephone number to call for your region, see "Contacting Dell" on page 142. Automated Order-Status Service To check on the status of any Dell products that you have ordered, you can go to support.dell.
www.dell.com | support.dell.com You are responsible for paying shipping expenses. You are also responsible for insuring any product returned, and you assume the risk of loss during shipment to Dell. Collect On Delivery (C.O.D.) packages are not accepted. Returns that are missing any of the preceding requirements will be refused at Dell’s receiving dock and returned to you. Before You Call NOTE: Have your Express Service Code ready when you call.
Diagnostics Checklist Name: Date: Address: Phone number: Service Tag (bar code on the back or bottom of the computer): Express Service Code: Return Material Authorization Number (if provided by Dell support technician): Operating system and version: Devices: Expansion cards: Are you connected to a network? Yes No Network, version, and network adapter: Programs and versions: See your operating system documentation to determine the contents of the system’s start-up files.
Getting Help www.dell.com | support.dell.
18 Specifications NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start→ Help and Support and select the option to view information about your computer.
www.dell.com | support.dell.
Communications (continued) Interface HDA Bus Network adapter 10/100/1000 Ethernet LAN on system board Wireless WLAN card, wireless switch with Dell Wi-Fi Catcher™ technology, internal card with Bluetooth® wireless technology, and Dell Mobile Broadband card. (The availability of the Dell Mobile Broadband card may vary by region.
www.dell.com | support.dell.com Display Type (active-matrix TFT) WXGA or WXGA+ Active area (X/Y) 303.74 x 189.84 Dimensions: Height 206 mm (8.11 inches) Width 320 mm (12.59 inches) Diagonal 357.1 mm (14.1 inches) Operating angle 0° (closed) to 180° Viewing angles: WXGA Horizontal 40/40° WXGA Vertical 15/30° WXGA+ Horizontal 40/40° WXGA+ Vertical 15/30° Pixel pitch: WXGA 0.2373 WXGA+ 0.2109 Power Consumption (panel with backlight) (typical): WXGA 7.0 W WXGA+ 7.
Track Stick X/Y position resolution (graphics table mode) Size 250 count/sec @ 100 gf protrudes 0.5 mm higher than surrounding keycaps Battery Type 9-cell "smart" lithium ion (85 WHr) 6-cell "smart" lithium ion (56 WHr) 4-cell "smart" lithium ion (35 WHr) Dimensions: 4-cell and 6-cell lithium-ion batteries: Depth 66.6 mm (2.62 inches) Height 19.2 mm (0.76 inch) 9-cell lithium-ion batteries: Depth 93.3 mm (3.67 inches) Height 20.59 m (0.81 inch) Weight 0.51 kg (1.12 lb) (9 cell) 0.33 kg (0.
www.dell.com | support.dell.com Battery (continued) Charge time (approximate): Computer off for standard 6-cell battery: approximately 1 hour to 80% capacity approximately 2 hours to 100% capacity Operating time Battery operating time varies depending on operating conditions and can be significantly reduced under certain power-intensive conditions. See "Using a Battery" on page 31 for more information on battery life.
AC Adapter (continued) Height 27.8.–28.6 mm (1.10–1.12 inches) (65 W) 33.8–34.6 mm (1.34–1.36 inches) (90 W) Width 57.9 mm (2.28 inches) (65 W) 60.9 mm (2.39 inches) (90 W) Length 137.2 mm (5.40 inches) (65 W) 153.4 mm (6.04 inches) (90 W) Weight (without cables) 0.36 kg (0.79 lb) (65 W) 0.46 kg (1.01 lb) (90 W) Temperature range: 0° to 35°C (32° to 95°F) Physical Height 32.3 mm (1.27 inches) Width 338 mm (13.3 inches) Depth 236 mm (9.3 inches) Weight (with 6-cell battery): With CD drive 2.
www.dell.com | support.dell.com Environmental (continued) Altitude (maximum): Operating –15.2 to 3048 m (–50 to 10,000 ft) Storage –15.2 to 10,668 m (–50 to 35,000 ft) Airborne contaminant level 152 Specifications G2 or lower as defined by ISA-S71.
19 Appendix FCC Notice (U.S. Only) FCC Class B This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules.
• Company name: Dell Inc. Worldwide Regulatory Compliance & Environmental Affairs One Dell Way Round Rock, TX 78682 USA 512-338-4400 NOTE: For further regulatory information, see your Product Information Guide. Macrovision Product Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Glossary Terms in this Glossary are provided for informational purposes only and may or may not describe features included with your particular computer. A AC — alternating current — The form of electricity that powers your computer when you plug the AC adapter power cable in to an electrical outlet.
is usually equal to 8 bits. computer. Also referred to as the Product Key or Product ID. C Control Panel — A Windows utility that allows you to modify operating system and hardware settings, such as display settings. C — Celsius — A temperature measurement scale where 0° is the freezing point and 100° is the boiling point of water. cache — A special high-speed storage mechanism which can be either a reserved section of main memory or an independent high-speed storage device.
DMA — direct memory access — A channel that allows certain types of data transfer between RAM and a device to bypass the processor. DMTF — Distributed Management Task Force — A consortium of hardware and software companies who develop management standards for distributed desktop, network, enterprise, and Internet environments. domain — A group of computers, programs, and devices on a network that are administered as a unit with common rules and procedures for use by a specific group of users.
F Fahrenheit — A temperature measurement scale where 32° is the freezing point and 212° is the boiling point of water. FBD — fully-buffered DIMM — A DIMM with DDR2 DRAM chips and an Advanced Memory Buffer (AMB) that speeds communication between the DDR2 SDRAM chips and the system. FCC — Federal Communications Commission — A U.S. agency responsible for enforcing communications-related regulations that state how much radiation computers and other electronic equipment can emit.
without using a cable connection. integrated — Usually refers to components that are physically located on the computer’s system board. Also referred to as built-in. I/O — input/output — An operation or device that enters and extracts data from your computer. Keyboards and printers are I/O devices. covering a small area. A LAN usually is confined to a building or a few nearby buildings.
assigns memory addresses to physical locations at start-up. Devices and software can then identify information that the processor can access. memory module — A small circuit board containing memory chips, which connects to the system board. MHz — megahertz — A measure of frequency that equals 1 million cycles per second. The speeds for computer processors, buses, and interfaces are often measured in MHz.
transferring data between two devices through the processor as part of the data path. pixel — A single point on a display screen. Pixels are arranged in rows and columns to create an image. A video resolution, such as 800 x 600, is expressed as the number of pixels across by the number of pixels up and down. Plug-and-Play — The ability of the computer to automatically configure devices.
(IDE) interface. ScanDisk — A Microsoft utility that checks files, folders, and the hard disk’s surface for errors. ScanDisk often runs when you restart the computer after it has stopped responding. SCSI — small computer system interface — A high-speed interface used to connect devices to a computer, such as hard drives, CD drives, printers, and scanners. The SCSI can connect many devices using a single controller. Each device is accessed by an individual identification number on the SCSI controller bus.
for this program. T TAPI — telephony application programming interface — Enables Windows programs to operate with a wide variety of telephony devices, including voice, data, fax, and video. text editor — A program used to create and edit files that contain only text; for example, Windows Notepad uses a text editor. Text editors do not usually provide word wrap or formatting functionality (the option to underline, change fonts, and so on).
operating system. If the computer is infected, the boot virus may replicate itself onto all the floppy disks that are read or written in that computer until the virus is eradicated. V — volt — The measurement of electric potential or electromotive force. One V appears across a resistance of 1 ohm when a current of 1 ampere flows through that resistance. W W — watt — The measurement of electrical power. One W is 1 ampere of current flowing at 1 volt.