Owners Manual

Installing the WLAN card

Steps

1. Slide the WLAN card [1] at an angle into the WLAN card connector on the system board.

2. Connect the WLAN antenna card cables [2] to the connector on the WLAN card.

3. Align the screw hole on the WLAN card bracket with the screw hole on the WLAN card [3].

4. Replace the single (M2x2) [4] screw to secure the WLAN card to the system board.

5. Stick the Mylar sheet on the system board to cover the WLAN card [5].

Removing and installing components