Owners Manual
Table Of Contents
- Dell Latitude 7300 Service Manual
- Contents
- Working on your computer
- Technology and components
- Major components of your system
- Removing and installing components
- System setup
- Troubleshooting
- Getting help
CAUTION: Route the speaker cable [1] over the LED daughterboard and then connect it to the system board
[2] to prevent damage to the speaker cables.
1. Connect the speaker cable
2. Install the battery.
3. Install the base cover.
4. Follow the procedure after working inside your computer.
Touchpad button board
Removing the touchpad button board
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the speaker.
1. Disconnect the touchpad button board cable from the touchpad module [1].
2. Remove the two (M2x2.5) screws that secures touchpad button board to the palmrest assembly [2].
3. Remove the touchpad button board from the palmrest assembly [3].
44
Removing and installing components