Owners Manual

4. Remove the battery.

5. Remove the speaker.

6. Remove the memory module.

7. Remove the DC-in .

8. Remove the WLAN card.

9. Remove the system board.

NOTE: System board can be removed with heatsink assembly attached.

10. Remove the coin cell battery.

11. Remove the keyboard.

Steps

1. Remove the two (M2x3) screws that secure the power button with fingerprint reader on the palmrest [1].

2. Lift the power button with fingerprint reader board off the palmrest [2].

Installing the power button with fingerprint reader

Steps

1. Place the power button with fingerprint reader on the palmrest [1].

2. Replace the two (M2x3) screws that secure the power button with fingerprint reader on the palmrest [2].

Disassembly and reassembly