Owners Manual

Table Of Contents
7. Remove the system fan.
8. Remove the DC-in .
9. Remove the WLAN card.
10. Remove the WWAN card.
11. Remove the system board.
NOTE: System board can be removed with heatsink attached.
12. Remove the coin cell battery.
13. Remove the SmartCard reader board.
About this task
After performing the preceding steps, you are left with the palmrest and keyboard assembly.
Next steps
1. Replace the SmartCard reader board.
2. Replace the coin cell battery.
3. Replace the system board.
NOTE: System board can be replaced with heatsink attached.
4. Replace the WWAN card.
5. Replace the WLAN card.
6. Replace the DC-in.
7. Replace the memory module.
8. Replace the system fan.
9. Replace the speaker.
10. Replace the battery.
11. Replace the base cover.
12. Replace the microSD card.
13. Follow the procedure in after working inside your computer.
96
Disassembly and reassembly