Owners Manual

Table Of Contents
6. Install the:
a. base cover
b. Installing the SIM tray (WWAN models) on page 12
7. Follow the procedure in After working inside your computer
Memory Module
Removing the memory module
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Removing the SIM tray (WWAN models) on page 11
b. base cover
c. battery
3. To remove the memory module:
a. Pry apart the memory module latches [1].
b. Lift and remove the memory module from the system board [2].
Installing the memory module
Steps
1. Insert the memory module into its connector on the system board.
2. Gently push the memory module until the latches snap it into place.
3. Install the:
22
Removing and installing components