Owners Manual

Installing the Coin-Cell Battery
1. Insert the coin-cell battery in its place on the computer.
2. Route the coin-cell battery cable along its routing channels.
3. Fix the adhesive tape to secure the coin-cell battery cable.
4. Connect the coin-cell battery cable to its connector on the system board.
5. Install the:
a. battery
b. base cover
6. Follow the procedures in After Working Inside Your Computer.
Removing the Keyboard Trim
1. Follow the steps in Before Working Inside Your Computer.
2. Pry the keyboard trim from its edges.
NOTE: You may need a sharp tool to pry the keyboard trim from its edges.
3. Remove the keyboard trim from the keyboard.
23