Owner's Manual

− For more information on ESX and ESXi, see the readme file available at
ftp://ftp.emc.com/pub/emcgrab/ESX/
.
NOTE: Make sure that SSH is installed and configured. Credentials for normal user is required to
establish SSH session, and root password is required to run commands as root.
NOTE: Make sure adequate disk space is available to store a copy of all logs and system data that is
collected.
• Fibre Channel Switches: Enable Telnet on all McData switches for Lasso to collect from them.
• Ethernet Switches: Enable Telnet on all M6220 Ethernet switches.
• Command line JRE Version 1.6 or later.
• Modular Disk Storage Manager must be installed on the management station for successful MD
Series collection.
• Modify the timeout value, since the default timeout value of 15 minutes may not be sufficient to
collect data from PowerVault NX3500 and EqualLogic FS7500 devices. The timeout value
(nas.timeout.value) must be modified in the
NAS.properties file available in the Lasso installation
directory.
NOTE: The timeout value is in milliseconds.
NOTE: This timeout mechanism is applicable to all the devices. For collection to be successful,
change or update the corresponding device properties file.
• SANsurfer CLI (FC) must be installed on the remote Windows, Linux, and VMware Host to gather
FC HBA information.
• SANsurfer CLI (iSCSI) must be installed on the remote Windows, Linux, and VMware hosts to
gather iSCSI HBA information.
• HBAnyware CLI (FC) must be installed on the remote Windows, Linux, and VMware hosts to
gather FC HBA information.
What’s New
• Support to collect, parse, and view SAN configuration report for System Center Virtual Machine Manager
(SCVMM) 2008 and 2012 servers. The report includes the following device features:
− Server Properties
− VMM Group Information
− Clusters Information
− Hosts Information
o General Host Information
o Physical Disks Information
o Host Adapters Information
o Virtual Machines
 VM Information
 VM Adapters Information
o Virtual Network Adapters
• Support to collect, parse, and view SAN configuration report for Broadcom 57810 CNA as part of the
windows host collection. The Report includes the following device features:
− General Adapter Information
− Ports and Functions Information
− DCBX Information
o Priority Group Mapping
− ISCSI Targets Information
• Support to collect, parse, and view SAN configuration report for Dell PowerConnect 2824, 2848, 3524,
3524P, 3548, and 7024F switches.