Manual

30xxx | Basic Software Operationxxx
Figure 3.4: Product Type Dialog Box
3 Select a Vendor. For each vendor, the supported product names appear in
the Product list. Select a product.
If the Remote Console Switch model you wish to add is not available
in the Product list, select Other. Once this switch is discovered, it will
be available in the Product list the next time you add a Remote
Console Switch.
4 Click Next.
5 You are prompted to indicate if the Remote Console Switch has an
assigned IP address. Click No and then click Next.
6 The Network Address window appears. Type the IP address, subnet mask (if
using IPv4 mode) or prefix length (if using IPv6 mode), and gateway you