Specifications

5 Client Setup

This chapter describes how to set up the client platforms to deliver the Intel Pro WiDi

remote display user experience. This is a “Best Known Configuration” that describes the

intended outcome of the client setup process. When you have completed the client setup

process, you should have a client system that is configured with the “Best Known

Configuration.”

5.1 Installing the WiDi Software Stack

This section describes how to install Intel Pro WiDi and the required device drivers on the

client system(s).

Note: It is best practice to remove any previous versions of WiDi software, Intel PROSet/Wireless

software, and the Intel HD Graphics Driver on the client before installing the new software

stack.

Note: For best results the drivers and software must be installed in the following order:

1. Intel HD Graphics Driver.

2. Intel PROSet/Wireless Software with Intel My WiFi Technology (Intel MWT).

3. Intel WiDi Software.

Step 1: Install Intel HD Graphics Driver

Install the Intel HD Graphics Driver by following the steps below. To perform this step you

must have administrative rights to the client system and have installed the platform

software components previously defined in the guide. Navigate to the drive and

directory location containing the Intel HD Graphics Driver installation files and

double click Setup.exe.

After the client system reboots, the graphics driver installation is complete.

Step 2: Install Intel PROSet Wireless Software

Install the Intel PROSet/Wireless Software with Intel MWT by following the steps below. To

perform the steps in this section, you must have administrative rights to the client system

and have installed the platform software components previously defined in the guide. Your

installation should closely resemble the example below.

Navigate to the drive and directory location containing the Intel PROSet Wireless

installation files and double click Autorun.exe.

Step 3: Install Intel WiDi Application

This section describes how to install the Intel WiDi application on the client system(s).