Setup guide

Back to Contents Page

 Speakers

Dell™Inspiron™1564ServiceManual

Removing the Speakers

Replacing the Speakers



Removing the Speakers



1. Follow the procedures in Before You Begin.



2. Remove the battery (see Removing the Battery).



3. Follow the instructions from step 3 to step 19 in Removing the System Board.



4. Remove the five screws that secure the two speakers to the computer base.



5. Note the routing of the speaker cable and remove the speakers and cable from the computer base.

Replacing the Speakers



1. Follow the procedures in Before You Begin.



2. Place the speakers in the computer base.



3. Route the speaker cable in the routing guides on the computer base.



4. Replace the five screws that secure the two speakers to the computer base.



5. Follow the instructions from step 5 to step 24 in Replacing the System Board.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface.

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the

computer.

screws (5)

speakers (2)

speaker cable routing

