Users Guide

A list of bluetooth enabled devices within the range are displayed.

4. Click PN771M Pen from the list of devices displayed.

5. Click Connect, and then click Done.

Reconnecting Bluetooth on the Active Pen

If the Active Pen is out of the Bluetooth range, you can reconnect the Active Pen to your computer.

Using the pen garage

NOTE: Ensure that the bluetooth on your computer is turned on before performing the following steps.

To reconnect the Bluetooth, do the following:

1. Place the Active Pen in the pen garage.

2. In the taskbar, click Bluetooth, and then click Go to Settings.

The Bluetooth & other devices window is displayed.

3. In Bluetooth & other devices window, the status of the Active Pen is changed from paired to connected.

Using the tail button

NOTE: Ensure that the Bluetooth on your computer is turned on before performing the following steps.

You can also reconnect the Active Pen using the tail button.

1. Click the tail button one time, until the LED starts to blink white.

2. In the taskbar, click Bluetooth, and then click Go to Settings.

The Bluetooth & other devices window is displayed.

3. In Bluetooth & other devices window, the Active Pen status changes from paired to connected.

Charging the Active Pen

To charge the Active Pen, do the following:

1. Align the two pogo pins on the Active Pen with the contact points on the Active Pen garage.

2. Place the Active Pen into the Active Pen garage. The Active Pen starts charging.

NOTE:

The estimated time taken to charge the Active Pen is given in the following table.

Table 3. Charging time

Estimated charging time Battery charge status

5 minutes 0% to 20%

30 minutes 0% to 98%

45 minutes 100%

Checking the Active Pen battery status

Using Windows Settings

You can check the Active Pen battery status in the Bluetooth & other devices window.

Dell Chargeable Active Pen