Service Manual
Table Of Contents
- Inspiron 3593 Service Manual
- Contents
- Working inside your computer
- Removing and installing components
- Recommended tools
- Screw list
- Optical drive
- Base cover
- Battery
- Memory modules
- Wireless card
- Optical-drive connector board
- Coin-cell battery
- Fan
- Solid-state drive/Intel Optane
- Hard drive
- Touchpad
- Speakers
- Heat sink
- Display assembly
- Power-adapter port
- I/O board
- Power button
- System board
- Power button with fingerprint reader
- Palm-rest and keyboard assembly
- Display bezel
- Camera
- Display panel
- Display hinges
- Display cable
- Display back-cover and antenna assembly
- Device drivers
- System setup
- Troubleshooting
- Getting help and contacting Dell
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
Procedure
1. Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.
2. Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
3. Connect the interposer to the hard-drive assembly.
4. Using the alignment posts, place the hard-drive assembly on the palm-rest and keyboard assembly.
5. Replace the four screws (M2x3) that secure the hard-drive assembly to the palm-rest and keyboard assembly.
6. Connect the hard-drive cable to the system board and close the latch to secure the cable.
Removing and installing components
39