Service Manual

Removing the display back-cover and

antenna assembly

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1. Remove the base cover.

2. Remove the wireless card.

3. Remove the display assembly.

4. Remove the display bezel.

5. Remove the camera.

6. Remove the display panel.

7. Remove the display hinges.

8. Remove the display cable.

Procedure

After performing all the above steps, we are left with the display back-cover and antenna assembly.

Removing the display back-cover and antenna assembly 91