Service Manual

Replacing the display panel

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1. Place the display panel on a flat and clean surface.

2. Connect the display cable to the connector at the back of the display panel and close the latch to secure the cable.

3. Adhere the tape that secures the display cable to the back of the display panel.

4. Place the display panel on the display back-cover and antenna assembly.

5. Align the screw holes on the display panel with the screw holes on the display back-cover and antenna assembly and

Rreplace the screws that secure the display panel to the display back-cover and antenna assembly.

Replacing the display panel 85