Service Manual

Replacing the front bezel

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in Before

working inside your computer. After working inside your computer, follow

the instructions in After working inside your computer. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance.

Procedure

1 Align and insert the front bezel tabs into the front panel slots.

2 Rotate the front bezel towards the chassis until the front-bezel tabs snap into

place.

3 Place the computer on its side.

Post-requisites

Replace the computer cover.